Rustol Owatrol oil

The alternative to turpentine as an additive for your paint. Ensures optimal processing under all conditions. Can be added to 1-component, turpentine-thinning (paint) systems. Also suitable for the new generation of 2010 paints!

Can be applied directly to rusty steel. Can be overcoated with 1-component systems that are thinned with turpentine. Can be used on ships, (classic) cars, beams, fencing, etc. PROPERTIES Penetrating anti-rust agent Stops rust formation and prevents new corrosion. Penetrates down to the sound metal. Isolates the substrate and displaces air and moisture. Adhesion layer for paint Adheres to all substrates, including galvanized surfaces, aluminum, zinc, wood, etc. Preserves the original appearance of the substrate (metal, wood, etc.). Enhances adhesion and forms an ideal adhesion layer for primers or finish coats. Can be applied directly to non-flaking rust layers. Resistant up to +175 °C. Paint additive Makes alkyd-based paints rust-resistant. Makes paints easier to brush out and apply. Improves the viscosity of the paint, allowing it to be worked even in cold, warm, or windy weather. Ideally suited to replace thinners and increases the paint's opacity. Wood impregnation Penetrates deep into the wood and makes it water-repellent. Isolates metal parts. USE Ferrous and non-ferrous metals. (Can be applied to wood, plastics, glass, etc.) Rusty to heavily rusted surfaces. For new surfaces, preferably RUSTOL-PRIMER paint or RUSTOL-DÉCO. Can be used with all alkyd-based air-drying varnishes, paints, lacquers, and stains , oil paints, synthetic paints, one-component urethane systems, asphalt-bitumen-based paints, lacquer fillers. Mixed into alkyd-based stains, it can be used to better impregnate wood and protect metal parts (hardware). Cannot be used in fast-drying paints (type automotive lacquers), chlorinated rubber-based paints or two-component systems, or water-based paints (see OWATROL E-B and FLOETROL ). APPLICATION Check that the substrate is dry and all grease stains and mill scale have been removed. RUSTOL-OWATROL is more effective on lightly rusted substrates because the rust is used as a pigment to form a protective layer. To make a paint rust-resistant, always first perform a compatibility test and make a mixture of 25% RUSTOL-OWATROL with 75% paint. To make a paint easier to work with, add 5% RUSTOL-OWATROL instead of turpentine.