Victron Phoenix Smart 12V Inverter

The Phoenix Inverter Smart is an efficient and reliable inverter. It is built on our proven and field-tested platform and now comes with a slimmer design and an all-metal enclosure. Models are available in 1600 VA, 2000 VA, 3000 VA and 5000 VA for 12, 24 or 48V systems.

It is powerful enough to feed most plug-in devices in your car, boat, caravan or home. A ring-core transformer provides high peak current capacity, stable voltage and frequency and a high sine wave quality.

Installation is easier than ever with terminals that are more accessible to the installer and enable a more professional finish.

Bluetooth is built-in and makes setting up your high-power inverter easier than ever before. Configure alarms, alarm relays, voltage cut-out, eco mode and much more. All from VictronConnect

Integrated Bluetooth: fully configurable with a tablet or smartphone

• Low battery voltage alarm
• Low battery voltage cut-out and restart levels
• Dynamic cut-out: load-dependent cut-out level
• Output voltage: 210 - 245V
• Frequency: 50Hz or 60Hz
• ECO mode on/off and ECO mode sensitivity level
• Alarm relay monitoring
• Input and output voltage, load and alarms

VE.Direct communication port
The VE.Direct port can be connected to a computer (VE.Direct to USB interface cable required) in order to configure and monitor the same parameters.

Proven reliability
The full bridge plus toroidal transformer topology has proven its reliability over many years. The inverters are short-circuit proof and protected against overheating, whether due to overload or high ambient temperature.

High starting power
Needed to start loads, such as power converters for LED lamps, halogen lamps or power tools.

ECO mode
In ECO mode, the inverter switches to standby when the load drops below a preset value. Once in standby, the inverter switches on for a short period every 2.5 seconds (adjustable). If the load exceeds a preset level, the inverter remains switched on.

Remote on/off
An external on/off switch can be connected to a two-pole connector. Alternatively, the H terminal (left) of the two-pole connector can be switched to battery plus, or the L terminal (right) of the two-pole connector can be switched to battery minus (or, for example, the chassis of a vehicle).

LED diagnostics
Refer to the manual for a description.

To transfer the load to another AC source: the automatic transfer switch
For our low-power inverters, we recommend our Filax Automatic Transfer Switch. The Filax has a very short switching time (less than 20 milliseconds), so that computers and other electronic equipment can continue to operate without interruption. Alternatively, use a MultiPlus with an integrated transfer switch.