Victron MultiPlus Compact 24V 800 VA - 2000 VA

The new Victron MultiPlus Compact is designed to replace the MultiPlus Compact range. It is a powerful pure sine wave inverter and advanced battery charger featuring adaptive charging technology and a fast AC transfer switch in a single compact enclosure.

 Two AC outputs
The main output has an uninterruptible function. The MultiPlus takes over the power supply to the connected loads in the event of a power failure or if the shore/generator power is interrupted. This happens so quickly (in less than 20 milliseconds) that computers and other electronic devices can continue to operate without interruption.
The second output is only activated if AC power is available at one of the MultiPlus inputs. Loads that must not discharge the battery, such as a boiler, can be connected to this output (second output available on models of 3 kVA and above).

Virtually unlimited power thanks to parallel connection
Up to six MultiPlus units can be connected in parallel to deliver greater power. For example, six 24/5000/120 units can achieve an output power of 25 kW / 30 kVA with a charging capacity of 720 A.

Three-phase connection
In addition to parallel connection, three units of the same model can be configured for a three-phase output. But that is not all: up to 6 sets of three units can be connected in parallel for an inverter power of 75 kW / 90 kVA and a charging capacity of more than 2000 A.

PowerControl - Make the most of limited generator, shore or grid power
The MultiPlus is a very powerful battery charger. This means a heavy load on the generator or shore connection (almost 10 A per 5 kVA MultiPlus at 230 VAC). The MultiPlus control panel allows a maximum generator or shore power to be set. The MultiPlus then takes other power consumers into account and only uses the power that is still 'left over' for charging, so that the generator or shore connection does not become overloaded.

PowerAssist - do more with generator or shore power
This feature adds another dimension to the PowerControl principle. This allows the Victron MultiPlus Compact to supplement the capacity of the alternative source. Where peak power is often only needed briefly, the MultiPlus ensures that insufficient shore or generator power is immediately compensated with power from the battery. When the load decreases, the reserve power is used to recharge the battery.

Solar energy: AC power always available - even during a grid failure
The Victron MultiPlus Compact can be used in both off-grid and grid-connected PV and other alternative energy systems.
Software to detect loss of grid power is available.

System configuration
• If the settings need to be changed in a standalone application, this can be done within a few minutes via a DIP switch setting procedure.
• Parallel and three-phase applications can be configured with the VE.Bus Quick Configure and VE.Bus System Configurator software.
• Off-grid, grid-interactive and self-consumption applications, with inverters and/or MPPT solar chargers, can be configured with assistants (application-specific software for specific applications).

Remote monitoring and control
Victron Ethernet Remote, Venus GX and the Color Control Panel.
Data can be stored and displayed free of charge on the VRM (Victron Remote Management) website.

Remote configuration
If connected to the Ethernet, systems with a Color Control panel are accessible and settings can be changed.

Combi charger/inverter Phoenix Multiplus C24/1200/25 Dimensions: 375x214x110 mm(l,w,h) Weight: 10 Kg Voltage: 24 Vdc Output voltage: 230 VAC Continuous power: 1000 W P30 power: 1000 W Peak power: 2400 W Switching power: 3600 W Charging current: 25 A