Rustol Owatrol CIP

Rustol C.I.P. Rust converter, rust treatment.
For heavily rusted surfaces / LEAD-FREE! · Rust-converting / rust-inhibiting primer. Suitable for virtually all surfaces and can be overcoated with virtually all paint systems.

For heavily rusted surfaces / LEAD-FREE! · Rust-converting / rust-inhibiting primer. Suitable for virtually all surfaces and can be overcoated with virtually all paint systems. PROPERTIES Universal primer suitable for overcoating with all types of paint systems, does not dissolve and guarantees good adhesion of subsequent layers. Long-lasting action by penetrating and passivating the surface; perfect isolation of the sound metal, exceptional adhesion. Enhanced protection thanks to active pigments and perfect film properties. Easy to use; the surface does not need to be sandblasted beforehand. Suitable for new or rusted surfaces indoors and outdoors. Resistant up to +175 °C. APPLICATION RUSTOL-C.I.P. (Corrosion Inhibitor Primer) is recommended for applications in difficult conditions: marine or tropical climates, corrosive fumes, protection of cars, materials used in public works and boat ballast tanks. Rustol -C.I.P. provides effective protection. RUSTOL-C.I.P. is ideally suited as a primer for two-component systems or paints with a high solvent content (polyurethane, epoxy, chloroprene, automotive paints ...). APPLICATION INSTRUCTIONS Stir well before and during use to re-mix the settled pigment into the paint. Do not dilute. On rusted surfaces, first remove most of the rust, loose scale or loose old paint layers with a wire brush. A slight layer of rust may still be present on the surface. Surfaces exposed to chemicals (salts, acids or alkalis ...) must first be thoroughly rinsed with water or steamed. In more specific difficult cases, use suitable solvents. Before application, the surface must be perfectly dry and free from grease stains. OUR ADVICE On mechanically rust-removed surfaces (e.g. by sandblasting), it is not necessary to apply RUSTOL-C.I.P. immediately. A light layer of rust has no adverse effect on the performance of the product.