Hempel Mille Xtra 7166C

Hempel Mille Xtra antifouling is a high-quality self-polishing antifouling. Mille Xtra antifouling provides protection throughout the season. This particular antifouling offers good value for money and is easy to apply.

Antifouling helps protect polyester, wooden and steel boats against marine growth. Note: not suitable for use on aluminium boats. This antifouling paint is available in various colours. Choose your preferred colour and size. 

Description: underwater paint based on bitumen and aluminium for application below the waterline. Provides excellent rust-inhibiting and preservative properties when applied in sufficient layers. Due to its high aluminium pigment content, this underwater paint has an inhibiting effect on the so-called bleeding through of existing tar layers. On bare steel and existing (coal) tar systems, apply the first layer of Underwaterprimer, diluted 15-20% with Epifanes 1-C Spray Thinner, and apply with a stiff brush (block brush or badger brush). Can be overcoated with so-called classic (soft) antifoulings, as well as self-polishing antifoulings. However, allow the Underwaterprimer to cure for 7 days before applying an antifouling. Apply the antifouling in one coat, so do not brush back and forth too much. Do not apply hard antifouling based on chloroprene rubber or vinyl. Application: As a new protective underwater system for wood and steel. Also suitable for the maintenance and repair of existing coal tar layers and can be used as a barrier coat over traditional systems and remnants of existing (tar) antifoulings. Brush application: Epifanes Paint Thinner 1st coat on bare steel and tar layers; Epifanes 1-C Spray Thinner Recommendation: Stir well before use. Overcoatable: After 24 hours at 18°C. Overcoatable with: After 7 days with Werdol Copper-Free and Epifanes Foul Away Coverage: 9 m2/l @ 50 microns Colours: silver bronze