Epifanes Paint Remover

A safe and low-odour paint stripper for removing almost all types of single- and two-component coatings, varnishes, antifouling paints and epoxy paints. Very high stripping power and does not dry out. Can be applied even below 0°C. Does not drip from vertical and overhanging surfaces, contains no alkalis, acids or biocides, is pH neutral, biodegradable and does not damage the substrate.

Description: A safe and low-odour paint stripper for removing almost all types of single- and two-component coatings, varnishes, antifouling paints and epoxy paints. Very high stripping power and does not dry out. Can be applied even below 0°C. Does not drip from vertical and overhanging surfaces, contains no alkalis, acids or biocides, is pH neutral, biodegradable and does not damage the substrate. Application: Suitable for use on polyester, steel, wood and aluminium. Do not apply to soft plastics. Always first test on a small area. After treatment, thoroughly remove all residues before applying the first coat of paint. Advice: Stir before use. Apply a thick, single coat to the old paint layer using a soft, not too short brush with natural bristles. Do not brush over the same area for long. Depending on the type of paint and the thickness of the layer, leave the paint stripper to work for 30 minutes to 4 hours. Then scrape off the paint residues with a putty knife or paint scraper. Remove the final paint stripper residues with water and wash the surface clean. Coverage: 3 m2/l