Epifanes Polyurethane Hunting Varnish gloss with UV filter
Epifanes Polyurethane Hunting Varnish gloss with UV filter
High-gloss two-component marine varnish with exceptionally high exterior durability. Scratch-, impact- and wear-resistant, and highly weather- and water-resistant. The built-in UV filter provides optimal protection for the wood against discoloration.
Application
As a complete varnish system on new, non-working wood, indoors and outdoors above the waterline. As a filler coat for a single-component varnish finish. As a UV-protective varnish system over epoxy resin or an epoxy resin sealer and adhesion coat for a single-component varnish finish. Maintenance of existing two-component varnish systems.
Brush application
Epifanes Poly-urethane Brush Thinner
Spray application
Epifanes Poly-urethane Spray Thinner
Recoatable
After 24 hours (20°C). Within 48 hours without intermediate sanding.
Coverage:
10m² per 750gr.
Mixing ratio by weight
2 parts base (A) : 1 part hardener (B)
Description: High-gloss two-component marine varnish based on polyester resin and isocyanate. Very high exterior durability, scratch-, impact- and wear-resistance, and weather- and water resistance. The built-in UV filter provides optimal protection for the wood against discoloration. Application: As a complete varnish system on new, non-working wood, indoors and outdoors above the waterline. As a filler coat for a single-component varnish. As a UV-protective varnish system over epoxy resin or an epoxy resin sealer and adhesion coat for a single-component varnish finish. Maintenance of existing two-component varnish systems regardless of brand. Brush application: Epifanes Poly-urethane Brush Thinner Spray application: Epifanes Poly-urethane Spray Thinner Pot life at 20°C: 3-4 hours Recoatable: After 24 hours at 18°C. Within 48 hours without intermediate sanding Recoatable with: Two-component: Epifanes Poly-urethane Satin Gloss Single-component : Epifanes Boat Varnish Gloss, Epifanes Hardwood Oil, Epifanes Eggshell Gloss Coverage: 10 m2/l @ 30 microns Mixing ratio by weight: 2 parts base A : 1 part hardener B